Play to explore your Teno

Modal content here


Your Teno is controlled via touch. Separate two halves slightly to turn on light. Fully separate to turn on speaker. Teno’s Bluetooth connection is automatically discoverable from your device when you fully open Teno and hear the chime sound.


Separate two halves of Teno slightly to turn on light. Fully separate to turn on speaker.

Play music via bluetooth

Upon turning on the speaker, connect to “Teno” on your phone’s bluetooth.


Tap the center top surface to activate the dimmer. There are four levels of brightness to choose from.


Slide two fingers up and down along the curve at the center of the bowl to adjust volume.

Play/Pause & Pick up/Hang up call

Tap the center top surface closer to the edge to receive or end a call.

Pairing two Teno (True Wireless Stereo)

Teno will automatically search for a second Teno upon turning both on for 1 minute before it stops. Put the two Teno close to one another to pair them. When the two devices are connected, you will hear bird chirping.* For Teno V1 (purchased before April 2022), double tap the bottom of your two Teno to enter TWS pairing mode.

Bluetooth disconnect

Press indented reset button next to charging port. You will hear wings
fluttering when disconnected.
If you don’t see “Teno” on your phone, ensure that Teno is not connected to another device. Disconnect first. If connection problems continue, try closing and re-opening Teno.

Battery levels

Sound of water drops indicate the remaining battery.

1 water drop - 15%
2 water drops - 10%
3 water drops - 5%

Charging cable

White light indicator - charging
Green light indicator - fully charged


Closing and re-opening Teno will resolve most issues. If that doesn’t work, hard reset the system by holding the reset button for 3 seconds.*

For Teno V1 (purchased before April 2022), press the reset button once. The Teno will restart and you will hear the chime.

Sound indicators

Chime - Speaker on/off
Bird chirping - Bluetooth/TWS connected to your device
Wings fluttering - Bluetooth disconnected
Water drops - Low battery

Download Teno start guide

Your Teno comes with an instructions manual included in the box. You can also download it here.

Download →



Feel like sharing a photo or video of yourself with your new purchase? Tag @hellolumio and use #hellolumio to be featured on our social channels.

Product warranty

We are dedicated to delivering the highest quality products. That means that your Teno comes with a one (1) year warranty from the date of purchase should there be defects in materials or workmanship. Your warranty is automatic, so there is no need to register.

We will repair or replace any defective parts, at our option, within a reasonable amount of time and free of charge, any time during the warranty period. If we replace the product, the replaced product will continue to be warranted for the remaining time of the original warranty period. All returned parts for which you have received a refund or replacement will become the property of Lumio. After service, we will be responsible for shipping the product back to you at our expense.

You will be responsible for shipping and transportation charges directly to Lumio. We recommend that you keep the original shipping materials as it is important that you package the product so that it will not be damaged during shipping. Lumio will not be responsible for any damages incurred during shipping due to poor packing, so please repackage the speaker carefully and make sure to insure your shipment.

This warranty does not cover damage caused by accident, misuse, abuse, neglect, excessive moisture, lightning, power surges, other acts of nature, unauthorized product modifications or repairs, or failure to follow the instructions outlined in the user manual.

Proof of purchase as evidence that the unit was purchased from an authorized dealer within the warranty period is required for warranty service. This limited warranty is fully transferable provided that the current owner furnishes the original proof of purchase.

This limited warranty only applies to Teno speakers purchased directly from Lumio’s website. For limited warranty coverage elsewhere, please contact your Lumio dealer, reseller, or distributor. The maximum liability of Lumio shall not exceed the actual purchase price paid by you for the product. In no event shall Lumio be liable for special, incidental, consequential, or indirect damages.

If you have any service questions, contact the Lumio support team at We will do everything we can to answer your questions and resolve any issue as quickly as possible.


Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic frames, fire or explosion, for which damages will be your (”Purchaser”) responsibility and not Lumio, LLC (”Manufacturer”).

Do not expose the fixture to moisture or submerge it in liquid. Keep the fixture dry at all times.

Do not store Teno in a high temperature environment, humidity extremes, excessive dust or vibrations.

Do not disassemble this fixture or attempt to re-purpose or modify it in any manner.

Keep magnetic storage media (disks and tapes) at least four inches away in order to avoid data loss.

To reduce the risk of electrocution, do not attempt to open the fixture. There are no user serviceable parts inside. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way.

This product should not be treated as ordinary household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC rules.

Fine print

Manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may suffer as a result of use, intended or unintended, or misuse of this light fixture.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

a. Reorient or relocate the receiving antenna.

b. Increase the separation between the equipment and receiver.

c. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

d. Consult the dealer or an experienced radio/television technician for help.